Gantry crane frame Installation Instructions

        gantry crane  scene according to the general conditions and circumstances existing cranes, Diaozhu girder, 8-ton hydraulic  hoist crane  Diaozhu side of the beam, connected with 8 tons of hydraulic lifting beam connecting another collateral. (Main beam of about 6 tons electric hoist, crane slewing radius of 6m, lifting height of 9m, upon inspection 25 tons hydraulic crane performance table, turning radius 6m, lifting height 9m, can lift 12.2 tons. Completely optional to the crane. )
      The general gantry crane after assembly tolerance requirements are as follows: Crane Span: ± 8mm.
      Crane span relative difference: ± 8mm.
      Universal primary beam gantry crane camber F: +0.4 F,-0.1F.
      Cantilever bend degree F0: +0.4 F,-0.1F.
      Beside the main beam camber f ≤ 15mm.
      Universal  bridge gantry crane  machinery and equipment after installation check all lubrication points and oil is complete, and then clean the gear oil tank, into the oil, the oil should be consistent with the scale of the oil dipstick. When no oil dipstick should be able to cover the teeth of the gear lowest high prevail. Oil and lubricants used in grades should be designed.