bridge gantry crane hydraulic lifts, is a versatile lifting handling equipment. Hydraulic lifts lift system is driven by hydraulic pressure, also known as hydraulic drive lifts.
gantry crane lifts and hydraulic tank on hydraulic lifts and some hydraulic machinery hydraulic system's primary role as a reservoir, cooling, separating the oil contained in the air and eliminate bubbles.
overhead gantry crane used hydraulic lift tank precautions to consider three points:
The first point: to consider the capacity of the mobile device to capture the general maximum pump flow rate 2 to 3 times, fixed equipment take 3 to 4 times.
The second point: Consider the oil tank when the system after all the hydraulic oil tank shall not extend below the minimum oil level when the oil tank after retraction shall not exceed maximum oil level.
The third point: Consider the tank structure, the traditional fuel tank bulkhead and dirt can not play the role of precipitation should be installed along the longitudinal axis of a vertical tank separator, the separator tank end plate at one end and a space is left between the separator both spatial connectivity, hydraulic pump oil inlet arranged at both sides of the bulkhead is not connected at one end, so that the oil return into the oil and the distance between the furthest, more than some of the hydraulic tank cooling effect.
These are most important points to consider for the gantry crane to use hydraulic lift tank. Thanks for sharing with us.
回复删除Regards
Henry Jordan
Hydraulic Seal Kits