Gantry crane pulley rope connection method

1) intercept wire rope,bridge gantry crane to cut at both sides of the first thin wire bundle to prevent loose, tied rope length of not less than five times the diameter.
2) wear around the wire rope, wire rope shall cause the formation of kink, hard bend, rolled flat, shaving and so on.eot crane Coiled rope or lifting should roll rotation method, paving the rope before wearing.
3) Either a fixed rope method, rope must be fixed firmly, all fixed connecting bolt locking device should be added, and approved by the technical inspection department re-examination.
4) pulley installation,overhead bridge crane you should check its rotation flexibility, without any jamming of the rotation is not flexible pulley should open the cleaning inspection, adjustment and replacement should still flexible.
5) wire rope, pulley, drum, main and auxiliary hook connected winding manner consistent with the provisions of drawings.